Loadcell Calibrator
 |
Loadcell calibrator is used for reference mV/V source. According to certified measurment results of the calibrator, a regular loadcell unit can be controlled if it is worked properly or not. On the other hand the calibrator can be used as a reference source to calculate unknown weights.
Used for fault control, load simulation, testings and load calibrations.
On tank weighing, when the filling is not possible for calibration, instead of real loading the Loadcell Simulator is used to calibrate the device.
|
Specifications
Output : 0 / 2.00000 mV/V
Uncertinity : 0.00010 mV/V
Supply: 5-10V DC ya da AC tipi
Cabling: 4wires (Red[+E], Black[-E], Red[+I], Black[-I])
Steps: 10 steps, each 0.2mV
Polarity Switch: Polarty switch is used for loading and unloading conditions
Certificate: Calibration certificate can be supplied upon request. |
Loadcell Simulator
 |
Loadcell simulator used for device faulty control, load simulation, test operations and calibrations without loadings.
On tank weighing, when the filling is not possible for calibration, instead of real loading the Loadcell Simulator is used to calibrate the device.
|
Specifications
Output: 0-2.5mV/V
Excitation: 5-10V DC ot AC type
Cabling: 4wires (Red[+E], Black[-E], Green[+I], White[-I])
Zeroing Switch: Easy use with On/Off Zeroing Switch |
|
|
