| English | Türkçe |

LCT Smart Transmitter

24mm Diameter

LCT_Anin  LCT_Anout  LCT_FW  LCT_serial-485 
LQi_firmware-eCal  LQi_multiconnection  LQi_temp  LCT_ROHSII

LCT Loadcell transmiters are smart devices which are designed to adapt to the industrial environment in many weight and force measurement systems, thanks to their tiny dimensions. It can be easily mounted on native wheatstone bridge type strain sensors. With its 24x24mm dimensions, it can be easily adapted to almost anywhere. It can transfer data to existing systems with RS485 standard Modbus RTU communication. In addition, 0-10V – 4/20mA output can be obtained without a hardware requirement, it can easily set the outputs with side inputs.

Specifications

  • 24mm diameter, small size
  • Standard Loadcell sensor compatible
  • e-Cal, Non require real load
  • 0-10V analog input
  • Fast and stable measurements
  • gLOGIC Smart Filter
  • Modbus RTU
  • Status LED
  • Easy setup via side inputs
  • PT100-PT1000 temperature sensor compatible
  • Can communicate with PLC units via 0/10V - 4/20mA Analog Output

 

pdf LCT Brochure 

pdf LCT Short Manual

Specifications

>

DEVICE
Side Inputs
 2 pcs setup inputs
Status LED
 Can read stability-motion, absolute zero, tare via communication
Digital Input 0.3 Hz – 1kHz signal reading range, 0-24V Analog or digital data can be read. PT100-PT1000 compatible

A/D CONVERTER
Minimum Input 0.13uV/Division
Loadcell Input
 350-1000 Ohm  (Maximum 10 Loadcells)
Internal Resolution
 24bits / 16.000.000
Conversion Speed
 100 samples/second
Loadcell Excitation
 3.3Vdc

CALIBRATION
CALIBRATION Type
 With real loading or Digital calibration Automatic Zeroing feature

OPTIONS
Analog Output 1 pcs 0/10V Analog Output
Digital Input 1 pcs Digital Input (5V-24V compatible)
Analog Input 1 pcs 0-24V analog input (10mV resolution)
Analog Output
 1 pcs 4-20mA Analog Output (12bits or 16bits resolution)

COMMUNICATIONS
Serial Output
 1pcs RS485 serial output port. 1200-115200bps Modbus RTU/ASCII communication or Remote Display

ENVIRONMENT
Voltage/ Power 24Vdc (+/- % 10) / 5W maximum (Optional 6V-9V-12V supply possibilies)
Mounting
 Diameter 24mm, 2mm mounting hole
Operating Temprature
 -20/70°C
Dimentions 24x24x4.5mm (WxLxH)
Protection Class IP65

Dimensions

LCTDimensions

 
Disclaimer